Proper mold inspection is becoming a priority for an increasing number of people every year, and mold awareness is growing rapidly thanks to the sheer amount of information provided through books, television and especially the Internet. The first step to prevent or stop health problems caused by mold is an invaluable inspection of the mold; the mold inspection will tell you if you have a mold problem, how serious it is, and then guide you through the steps in which you will determine the types of mold and eliminate them.
More details concerning mold inspection
The path to truly effective mold control is probably through a licensed mold inspector. A licensed mold inspector can be easily found using a quick search on the Internet or in the phone book. In the meantime, however, your ears and eyes will work wonders for you. As said earlier that mold grows best in hot and humid places; therefore, wherever you are, during a flood or even from a tap, you should immediately find it.
The interior of your windows should be sought. You must register your bathtubs and showers, your roof and if your house is made of plaster, the same plaster. Mold accumulates where the wood and paper are wet. Shower tiles can be covered with mold at the bottom. And these are not the only places worth paying attention to. Virtually any area of your habitat that may have been wetted in the past or may get wet in the future should be carefully considered. You can distinguish mold by its black or green colour and smell its moisture in the air.
On the other hand, sometimes there are substances in homes that look like mold, but obviously, this is not the case, so eliminating them is a costly waste of time. Such substances may include sap, which will sometimes grow in the attic beams when conditions are very high. Formed in small areas, usually brown or bright brown. This is not rust! Another example is foam insulation, where over time it can have a rough look, which some people take for mold. A more complex example is what is called thermal tracking or soot tracking. Thermal tracking or tracking of soot occurs when moisture is undergoing condensation on the walls and ceilings. Walls and ceilings are colder than air, which, moving through them, accumulates particles of soot and debris, leaving behind a picture of soot and grizzly. Tracing heat or soot often occurs in homes where many candles are burned or where a fireplace is used regularly. It is important to distinguish between real mold and substances that look rather frightening, but really harmless. After you have learned about the extent of the mold problem in your home, if you study it carefully, you can start getting rid of it.